(Blue Titanium/ Tungsten/Blk Tiger) 9″ PISTOL w/ Disintegrator-9″-MLOK Rail System Buzzsaw

$1,799.99

(9.25″ Nitride Premium PISTOL) (PATENTED, 9″ Siphon AGP Barrel)

9″ Forged Pistol with Disintegrator-9″ MLOK Rail System, K2+ Pistol Grip, Raptor Charging Handle,  SI Enhanced Dust Cover, Tiger Stripe Two Tone Cerakote, Titanium Buzzsaw and MORE!

PLEASE ALLOW 2-3 Weeks before shipping.

 

In stock

Description

9″ Pistol w/ Disintegrator-9″-MLOK Rail System

  • Barrel 9.25″ Siphon AGP (PATENTED US PAT NO. 10,274,273)) 4150 CrMoVa
  • Custom “Siphon” AGP barrel Profile
  • Chambered in 5.56 NATO
  • Premium Nitride Treatment inside and out (Barrel)
  • {Nickel Boron} M4 Extended Feed Ramps
  • 6 Groove Rifling
  • 1:7 Twist Rate
  • (Carbine) Gas System with Nitride Gas Tube
  • 1/2×28 Thread Pitch
  • Tuned AGP “Rearward” Angled Gas Port (PATENTED US PAT NO. 10,274,273)
  • Target Crown 11* Degree
  • Nitride Low Profile Gas Block with .750 seat
  • Legacy 2.0 Forged Upper & Lower Receiver Set
  • Hand Guard Type: Our Disintegrator-9″ MLOK Free Floating Rail System
  • Trigger Milspec
  • CMC Anti Walk Pins
  • Strike Industries Ultimate “Dust Cover”
  • (Nitride) Shot peened and MPI tested bolt
  • (Nitride) M16 Bolt Carrier with properly staked carrier key
  • Raptor Ambi Charging Handle
  • SOT Titanium “Buzzsaw 2.0″ Linear Compensator
  • QD End Plate-Staked (For QD Sling)
  • Carbine Buffer
  • Ambi 45* Short Throw Selector
  • MOE K2+ Pistol Grip
  • SB Tactical “SB-A3” Retractable Brace (PISTOL)
  • CERAKOTE: Tiger Stripe Two Tone ( * Colors may vary slightly )
  • Magpul MOE Trigger Guard
  • “Optics Ready” No sights  (Optic and Mount Shown Is NOT Included)
  • One 30 rd mag included (If legal in customers State)
  • Rifle Case Included
  • Weight:  lbs Unloaded without optics /ammo
  • Limited Lifetime Warranty

SOT DISINTEGRATOR-9.92″ (M-LOK) Rail System:

The SOT (DISINTEGRATOR-9-M-LOK)” Rail System has an overall length of 9″. It is a new cutting edge, highly refined rail system that blends state of the art custom precision CNC machining along with ultra aggressive Stealth like design. The DISINTEGRATOR is machined out of a one piece billet aluminum extruded rail which is much stronger and more rigid than 2 piece rail systems. The DISINTEGRATOR series boasts aggressive good looks as well as being tough enough to handle any mission all while weighing in at only 5.8 oz.! The DISINTEGRATOR-9 M-LOK Provides (3) Sling Swivel QD Attachment Points in total that are integrated into the Left, Right and Bottom of the rail.

The DISINTEGRATOR-9 Is designed to be used in with a (Micro/Low Profile Gas Block) on Pistol and Carbine gas system lengths as well as Blowback Pistol Calibers. This rail system gives the user a light weight more ”rigid” and modular way to mount accessories to their AR15.  See more..

 

Reviews

There are no reviews yet.

Be the first to review “(Blue Titanium/ Tungsten/Blk Tiger) 9″ PISTOL w/ Disintegrator-9″-MLOK Rail System Buzzsaw”