HQMS Trigger
$55.99
“High Quality Milspec Trigger” (HQMS) Trigger
(HQMS) Trigger is designed for those want the highest level of quality from a traditional Milspec trigger system. The pull of the HQMS is very similar to a standard mil-spec trigger, however the majority of the grittiness of the stock trigger pull has been removed while the well known reliability of a stock trigger remains. The pull weight is not less than the M4/M16 minimum weight specification of 5.5lbs.
In stock
Description
High Quality Mil-Spec Trigger (HQMS) Specification
Performance Advantages for the Shooter
• The HQMS trigger pull is smoother than a stock trigger. This is accomplished by honing the sear surfaces smooth while not removing metal below the valleys of the stock surface finish.
• Sear geometry has not been changed from standard so the high reliability that the stock trigger is known for is unchanged.
• Trigger and hammer are made from true 8620 alloy steel military specification castings, correctly carburized, quenched and tempered for high surface hardness.
• Disconnector is 1070 High Carbon steel properly Austempered into the spring range of hardness
• Springs are corrosion resistant and meet military specifications.
• A full force hammer spring is used for positive ignition of all types of ammunition.
• Trigger and hammer pins are improved over stock mild steel by using 4140 Chrome-Moly steel that has been quenched and tempered. Pins are centerless ground to a fine finish and a diameter 0.001” larger than stock to reduce play in the trigger assembly while retaining a slip fit into the weapon lower receiver.
• The pull weight is not less than the M4/M16 minimum weight specification of 5.5lbs.
Comes with (HQMS Trigger, Hammer, Disconnector, Pins and springs)
Reviews
There are no reviews yet.