Geissele (G2S) Trigger

Description

The Geissele (G2S) Trigger is a non-adjustable trigger that is a precision two-stage trigger and allows precise and accurate trigger control. The G2S is manufactured from the same tool steel as the SSA and the sears are wire EDM cut.  Visually, from the outside of the weapon there is no difference from the SSA and the feel and reliability is the same. The G2S however has a different way of holding the hammer pin in place, there is no laser markings, and the parts are only spot checked for MP.

FEATURES AND ADVANTAGES:

• Performance Advantages for the Shooter
• The Geissele G2S has a pull weight of about 4.5lb. in total,  2.5 lbs on the first stage and 2lb on the second stage.
• The pull weights and sear engagement are non adjustable by the shooter.
• Trigger and hammer are made from quality tool steel Sear surfaces are cut by a wire edm machine. Sears cut this way are very accurate and the non-directional surface finish of the wire edm gives a smooth trigger pull without the associated grittiness of directional machining marks left by a milling cutter.
• The initial force needed to start the disengagement of the sear surfaces is low and the force linearly increases at a low rate. This helps the shot to fall at the initial point of aim and aids in building shooter confidence in his weapons ability to put the rounds where his sight is pointing.
• The Geissele G2S trigger allows the shooter to slap through the trigger pull on close in shots but also set up a long range shot with a crisp trigger break.
• A full force hammer spring is used for quick locktime and positive ignition of all types of ammo. There is no lightened hammerspring used.
• The hammer is lighter than a standard AR15 hammer. The lightened hammer favorably decreases locktime and increases accuracy of the weapon, especially for snap shots.