16″ Midlength Rifle w/ JAVELIN-14 M-LOK Rail System

Description

16″ Midlength Rifle w/14″ JAVELIN M-LOK Rail System:

• Barrel 16″ 4150 CrMoVa (HP/MP)
• Custom Medium Barrel Profile
• Chambered in 5.56 NATO
• Premium Nitride Treatment inside and out (Barrel)
• {Nickel Boron} M4 Extended Feed Ramps
• 6 Groove rifling
• 1:7 Twist Rate
• MIDLENGTH Gas System with Nitride Gas Tube
• 1/2×28 Thread Pitch
• Tuned Gas Port
• 11* Degree Target Crown
• Nitride Micro Gas Block with .750 seat
• Forged Upper & Lower Receiver
• Hand Guard Type: 14″SOT JAVELIN M-LOK Free Floating Rail System
• MilSpec Hard Coat Anodize
• Shot Peened and MPI Tested Bolt
• (NITRIDE) M16 Bolt Carrier with Properly Staked Carrier Key
• Forged Charging Handle
• A2 Flash Hider-Nitride
• Optics Ready No Sights
• Mil-Spec Receiver Extension Tube
• End Plate-Staked
• Carbine Buffer
• A2 Pistol Grip
• Magpul MOE Carbine stock (Mil-Spec)
• Magpul MOE Trigger Guard
• One 30 rd mag included (If legal in customers State)
• Rifle Case Included
• Rifle Weight: 6 lbs Unloaded without optics /ammo
• Limited Lifetime Warranty

SOT Javelin-14″ (M-LOK) Rail System:

The SOT (Javelin-14-M-LOK)” Rail System has an overall length of 14″. It is  a cutting edge, highly refined rail system that blends state of the art custom precision CNC machining along with ultra aggressive Stealth like design. The Javelin is machined out of a one piece billet aluminum extruded rail which is much stronger and more rigid than 2 piece rail systems. The Javelin series boasts with aggressive good looks as well as being tough enough to handle any mission all while weighing in at only 11.9 oz.! The Javelin-14 M-LOK Provides (6) Sling Swivel Attachment Points in total; (3) Front (QD points) that are integrated into the left, right and bottom as well as(3) QD points on the Rear that are integrated into the left, right and bottom as well.

Designed to be used in with a (Micro/Low Profile Gas Block) on a (Carbine length, Midlength gas system, Rifle gas system). This rail system gives the user a light weight more ” rigid” and modular way to mount accessories to their AR15. See more..

Notice:

Our rails are designed to work and function with other (MILSPEC) components. Beware there are several companies in the firearms AR15 industry that make nice looking parts that are not (MILSEPC) and most importantly do not feature the required (MILSPEC) features in order to accept (MILSPEC) components. For reference you can take a look at our (Billet Upper) and notice the (MILSPEC) “recessed” cut near the front just behind the threads on the upper which is required to accept our rails. We have been told our rails can be slightly modified to work with the F-1 Billet uppers. While we have seen it done before, we cannot recommend this as a manufacturer.