14.8″ Rifle Length Siphon AGP Rifle W/ Disintegrator 14″ Rail System

Description

“Siphon AGP Rifle

14.8″ Rifle Length Rifle w/ DISINTEGRATOR-14 MLOK Rail System

• Barrel (PATENTED US PAT NO. 10,274,273) 14.8″ Siphon AGP 4150 CrMoVa (with Permanently Attached Inferno Muzzle Brake)
• Custom “SIPHON” AGP Medium Barrel Profile
• Chambered in 5.56 NATO
• Premium Nitride Treatment inside and out (Barrel)
• {Nickel Boron} M4 Extended Feed Ramps
• 6 Groove rifling
• 1:7 Twist Rate
• (RIFLE LENGTH) Gas System with Nitride Gas Tube
• 1/2×28 Thread Pitch
• “Sihpon” AGP Tuned Gas Port
• 11* Degree Target Crown
• (Nitride) Micro Gas Block with .750 seat
• (Nitride) Rifle Length Gas Tube
• Forged Upper & Lower Receiver
• MilSpec Hard coat Anodize
• Hand Guard Type: Our DISINTEGRATOR-14″ MLOK Free Floating Rail System
• (Nitride) Shot peened and MPI tested bolt
• (Nitride) M16 Bolt Carrier Group with properly staked carrier key
• Forged Charging Handle
• Permanent Attached SOT (INFERNO-2) Precision Muzzle Brake (Nitride)
• Mil-Spec receiver extension Tube
• Carbine Buffer
• SI Polymer Dust Cover
• A2 Pistol Grip
• Magpul SL-K Carbine Stock (Mil-Spec)
• Magpul MOE Trigger Guard
• Optics Ready / No Sights
• One 30 rd mag included (If legal in customers State)
• Soft Rifle Case Included with 5 Magazine Pouch
• Rifle Weight: 6.1 lbs Unloaded without optics /ammo
• Limited Lifetime Warranty

SOT Disintegrator-14″ (M-LOK) Rail System:

The SOT (DISINTEGRATOR-14-M-LOK)” Rail System has an overall length of 14.60″. It is a new cutting edge, highly refined rail system that blends state of the art custom precision CNC machining along with ultra aggressive Stealth like design. The DISINTEGRATOR is machined out of a one piece billet aluminum extruded rail which is much stronger and more rigid than 2 piece rail systems. The DISINTEGRATOR series boasts aggressive good looks as well as being tough enough to handle any mission all while weighing in at only 7.6 oz.! The DISINTEGRATOR-14 M-LOK Provides (4) Sling Swivel QD Attachment Points in total that are integrated into the Left, Right and Bottom of the rail.

The DISINTEGRATOR-14 Is designed to be used in with a (Micro/Low Profile Gas Block) on all gas system lengths as well as Blowback Pistol Calibers. This rail system gives the user a light weight more ” rigid” and modular way to mount accessories to their AR15. See more..