Disintegrator 6.75″PISTOL w/ Disintegrator-5.75″-MLOK Rail System

Description

10.5″ Pistol w/ DISINTEGRATOR-9″-MLOK Rail System

• Barrel 4150 CrMoVa 300BLKOUT(7.62×35 Chamber)
• 6.75″ Nitride Treated Barrel (inside & out)
• Chambered in 7.62×35 (300BLKOUT)
• Premium Nitride Treatment inside and out (Barrel)
• {Nickel Boron} M4 Extended Feed Ramps
• 6 Groove Rifling
• Carbine Gas System
• 1:7 Twist Rate
• (PISTOL)Nitride Gas System with Nitride Gas Tube & Gas Block
• 5/8×24 Thread Pitch
• Target Crown 11* Degree
• Nitride Low Profile Gas Block with .750 seat
• Forged Upper & Lower Receiver
• Hand Guard Type: Our DISINTEGRATOR 5.75″ MLOK Free Floating Rail System
• Milspec Trigger (Single stage)
• (Nitride) Shot peened and MPI tested bolt
• (Nitride) M16 Bolt Carrier with properly staked carrier key
• Charging Handle
• A2 Flash hider
• Mil-Spec receiver extension Tube
• Carbine Buffer
• A2 Pistol Grip
• SB Tactical SBA3 Pistol Stabilizing Brace
• Magpul MOE Trigger Guard
• One 30 rd mag included (If legal in customers State)
• Rifle Case Included
• Weight: 5.3 lbs Unloaded without optics /ammo
• Limited Lifetime Warranty
• Made in The USA

SOT DISINTEGRATOR-5.75″ (M-LOK) Rail System:

The SOT (DISINTEGRATOR-5-M-LOK)” Rail System has an overall length of 5.75″. It is a new cutting edge, highly refined rail system that blends state of the art custom precision CNC machining along with ultra aggressive Stealth like design. The DISINTEGRATOR is machined out of a one piece billet aluminum extruded rail which is much stronger and more rigid than 2 piece rail systems. The DISINTEGRATOR series boasts aggressive good looks as well as being tough enough to handle any mission all while weighing in at only 3.5 oz.! The DISINTEGRATOR-5 M-LOK Provides (3) Sling Swivel QD Attachment Points in total that are integrated into the Left, Right and Bottom of the rail.

The DISINTEGRATOR-5 Is designed to be used in with a (Micro/Low Profile Gas Block) on a (Pistol) length gas system as well as Blowback Pistol Calibers. This rail system gives the user a light weight more ” rigid” and modular way to mount accessories to their AR15. See more..